12PI Heavy Duty Pipe Tandem Axle Trailer
12pi
Download Data Sheet

STANDARD FEATURES

• Lower Jack Support Plate
• Two 6000# Axles w/ 2 Electric Brakes
• Complete Break-A-Way System w/ Charger
• 4’ Slide In Ramps (channel)
• Cambered Ez Lube Axles
• 2-7/8” PipeTop Rail Capped w/ Self Sealing Plugs
• Fold Back Tongue (14’ and longer)
• Set Back Jack
• Bulldog Forged Coupler
• Safety Chains Attached w/ Cold Rolled Eyelets
• Floor Secured w/ 5/16” Torx Screws
• Tie Down Pockets – Sides & Rear
• Spare Tire Mount (side)
• Reflective Marker Tape




SPECS
G.V.W.R.
12,000#
 
AXLE
Two 6000# EZ LUBE w/ Elec. Brakes
G.A.W.R.
(EA. AXLE) 5,560#
 
SUSPENSION
Multi-Leaf Spring w/ Equalizer
COUPLER
2-5/16” Bulldog
 
TIRE
7.50 X 16” Load Range E
SAFETY
CHAINS
¼” Grd. 70 w/ Safety Latch Hook
 
WHEEL
16 X 6 White Spoke 8-Bolt
JACK
2000# Top Wind (Bolted On)
 
FLOOR
2” Pine
TONGUE
5” Channel Fold Back
 
LIGHTS
D.O.T. Stop, Tail, Turn and Clearance
FRAME
3” X 5” X 1/4” Angle
 
ELEC. PLUG
7-Way RV
CROSS MEMBER
2” X 3” X 3/16” Angle
 
FINISH (PREP)
Acid Etched w/White Phosphorus, Undercoated w/ two coats primer

FENDERS
9” X 72” Double Broke Diamond Plate w/Back
 
FINISH
Painted w/ 2 Coats High Solid Supreme Acrylic
Automotive Grade Enamel, and Pinstriped
TOP RAIL
2-7/8” Pipe Square Back
   

AVAILABLE OPTIONS

Hydraulic Brakes On 1 Axle w/ Adjustable Demco Act.
Hydraulic Brakes On 2 Axles w/ Adjustable Demco Actuator
16” Spare Tire & Wheel
7K Drop Leg Jack
10K Top Wind Drop-Leg Jack
1/8” Diamond Plate Steel Floor (Per Sq. Ft.)
Adjustable Coupler in Channel
Rampgate in Lieu of Ramps
Higher Sides (Each Additional Foot)
Enclosed w/ Expanded Metal (Per Sq. Ft.)
Enclosed w/ Sheet Metal (Per Sq. Ft.) Changes Toprail to 3” Sq. Tube
5’ Stand-up Ramp in Lieu of Slide in Ramps
Intergrated Ramp Heavy Duty Ramp Gate w/ Gas Spring Assist in Lieu of Ramps